Hot water heaters are one of a house’s hardest working home appliances. Day or night, it’s creating perfectly heated water at any time when you want it. When it all of a sudden is no longer working adequately, most of us usually tend to panic.

Fortunately a nonfunctioning water heater doesn’t always mean a pricey repair work. Before making an emergency call to Tony & Son Plumbing, we suggest examining the problem yourself first.

Chesapeake Water Heater Repair Troubleshooting

Pilot Light CheckChesapeake Water Heater Repair

For gas water heaters first eliminate the small panel which is situated on the bottom of the appliance and examine to notice if the pilot light is lit.
Find out if may igniate in case it is not ignited. If it stays lit, one should be able to notice that the water heater ought to start functioning appropriately once more. The pilot light may perhaps need cleaned or the thermocouple may need replaced in the event the pilot light will definitely not continue being ignited.

Thermocouple Replacement

The term thermocouple might seem like a extremely specialized term, however it’s a component on ones water heater that can easily be replaced. Tony & Son Plumbing would recommend having us complete the replacement but the measures below are for instructional applications.

Refer to the owner’s guide. It must have suggestions for ways to remove and change the thermocouple.
Turn off the gas before removing anything from the water heater.
Following the instructions in your user’s manual, remove the thermocouple by detaching it from both sides of the pilot light. The brand new thermocouple on the water heater has to be cut to the proper length.
The gas can then be switched back on and examine for leakages, then the pilot light can be lit once more.

Press the Water Heater Reset Button

For house owners with an electric water heater, look for the position of the reset button and press it till a click is heard.
If a click is possibly not observed, or it falls short to restart the water heater, reset the breaker.
If a breaker reset does not do the trick, the thermostat will probably require being replaced.

Thermostat Replacement

Both the power to the water heater and the switch on the breaker will need to be turned off. Protection with electricity is required to be put into practice!
Use the owner’s guide to locate the thermostat wires, then separate them.
After removing the thermostat we will test to find out its problem. If it is defective, we will have tochange it.

Heating Element Replacement

While the power is still turned off, the access panel on the water heater can be opened up.
The terminal screws can be loosened and the wires can be drawn far from the heating element.
We’d after that analyze every part of the element to verify if they are faulty, and change them as needed.

These water heater troubleshooting actions help get ones heater working once again. Tony & Son Plumbing is always here to help, therefore don’t think twice to get in touch with us today for any Water Heater Repair Chesapeake VA help.